Inspection of fire and smoke dampers are required in all buildings, whether commercial or residential. The inspection should be conducted every four years because over time the damper and the parts associated with them age out and break down. The damaged fire damper will only promote fire spread instead of preventing its flow.
Once the system is exposed to fire (with a non-functional fire damper), it is very likely to cause property damage and loss of lives. Regular inspection and maintenance can make your system work safer and run smoother and faster.
Using uncertified fire dampers
Laboratory tested fire dampers are safe to use because they are tested on different parameters. These dampers are certified to be used only when they succeed at all level test. The fusible link, flame detector sensors and all important factors are thoroughly examined for safe use of the device. But an un-certified damper is usually not tested for all these parameters, and so they are prone to fail during fire hazards.
Rust or corrosion
Most Fire damper suppliers in Dubai supplies dampers from metallic materials, like metallic sheets bolts and nuts. These elements over time get rusted and corroded. This often affects the functionality and integrity of motorized fire dampers. It prevents the damper from opening and closing at the time when it is highly required.
Damaged fusible links and physical damage
Fire damper suppliers in Dubai often tell that physical damage is one of the main causes of fire damper failure. Because parts of dampers get worn out, walked out and bumped into overtime. These issues change the shape and integrity of damper and damage its functionality as well. So the damage parts must be inspected from time to time and replaced. At times fusible links also get cracked and get broken, which cause it not work properly and allow the spread of flame inside the system.
All these factors should be avoided, and one should ensure using only certified fire dampers. When purchasing these dampers, make sure to get them from renowned and reliable fire damper manufacturers.
Once the system is exposed to fire (with a non-functional fire damper), it is very likely to cause property damage and loss of lives. Regular inspection and maintenance can make your system work safer and run smoother and faster.
Using uncertified fire dampers
Laboratory tested fire dampers are safe to use because they are tested on different parameters. These dampers are certified to be used only when they succeed at all level test. The fusible link, flame detector sensors and all important factors are thoroughly examined for safe use of the device. But an un-certified damper is usually not tested for all these parameters, and so they are prone to fail during fire hazards.
Rust or corrosion
Most Fire damper suppliers in Dubai supplies dampers from metallic materials, like metallic sheets bolts and nuts. These elements over time get rusted and corroded. This often affects the functionality and integrity of motorized fire dampers. It prevents the damper from opening and closing at the time when it is highly required.
Damaged fusible links and physical damage
Fire damper suppliers in Dubai often tell that physical damage is one of the main causes of fire damper failure. Because parts of dampers get worn out, walked out and bumped into overtime. These issues change the shape and integrity of damper and damage its functionality as well. So the damage parts must be inspected from time to time and replaced. At times fusible links also get cracked and get broken, which cause it not work properly and allow the spread of flame inside the system.
All these factors should be avoided, and one should ensure using only certified fire dampers. When purchasing these dampers, make sure to get them from renowned and reliable fire damper manufacturers.
No comments:
Post a Comment