What you need to know about lifting shackles from manufacturers in UAE

There are a few basic types of shackles that you can use for lifting heavy equipment, but they all have the same basic structure and idea. Any shackles a material handling manufacturer in UAE will produce will have two main parts, which are the body and the pin. The body usually has one of two shapes, an anchor or bow shape, and a D shape. Although it depends on the particular use, the body of the shackle is generally used with a bolt pin or a screw pin.

If you are in the market to buy from Shackles manufacturers in UAE, make sure you get the right shackles by consulting the manufacturer’s catalog for the maximum working loads of the shackles. You should also be able to clearly see the load capacity of the shackle on its body. Shackles come in different sizes that you can find in the manufacturer’s catalog or website. The size of the shackle is determined by the size of the diameter of the bow section, and not the pin size. Shackles manufacturers in UAE produce shackles in varying degrees of resilience and wearability. Certain shackles should not be used above or below a particular temperature threshold. You should also check if your shackles are vulnerable to corrosive materials or gases.

Shackles should be inspected regularly. It is advisable to keep a close eye on the shackle and its pin holes for elongation and distress, as well as any bending that may occur. This means that the shackle is carrying far too much weight than its capacity. These shackles need to be replaced, especially if they show wear by more than 10% of the original dimensions. Keep in mind that all pins should be absolutely straight and seated.

Manufacturers usually provide a how to guide for the cleaning and maintenance of their shackles. Always follow through with your maintenance and inspection schedules for the safety of your equipment, load, as well as workers.